Security Camera Installers in Sydney

Licensed security camera installers serving Sydney, Greater Western Sydney, and surrounding suburbs.

Security camera installation in NSW must be carried out by a licensed security installer. A licensed electrician can run cabling, but fitting and commissioning a CCTV system legally requires a separate security industry licence issued by the Security Licensing and Enforcement Directorate (SLED). You can verify any installer's current licence status through the NSW licence verification tool. Browse the listings below and contact an installer directly. ProtectFind lists businesses, it does not take enquiries on their behalf.

Installers in the directory cover Greater Sydney from the inner suburbs through to Parramatta, the Hills District, and outer areas including Penrith, Liverpool, and Campbelltown in the west and south-west. Service areas vary by installer. Check individual listings to confirm coverage in your suburb before making contact.

ProtectFind is a directory. It does not provide, arrange, or carry out security installation services. The installers listed here are independent businesses. Any agreement you make is between you and the installer directly.

Listing details, including licence information, are provided by each installer. ProtectFind does not independently verify these details. Before hiring, ask to see a current licence and check it with the Security Licensing and Enforcement Directorate.

How much does security camera installation cost in Sydney?

Installation costs in Sydney tend to sit at the higher end of the national range, reflecting the city's labour market. Prices below are indicative. An installer will quote based on your specific property after a site assessment.

Single camera, straightforward install: From around $250 to $500 including the camera and labour. A single-storey brick veneer in Blacktown or Penrith with clear roof access will sit at the lower end.

Four-camera wired system: Typically $1,000 to $2,200 depending on recorder type, camera resolution, and cable run complexity. A Federation home in Paddington or an inter-war bungalow in Leichhardt with limited roof cavity access can push toward the higher end compared to a newer single-storey home in Castle Hill or Campbelltown.

Eight-camera commercial or larger residential system: $2,000 to $5,000 and above. Commercial premises in the Sydney CBD, Parramatta, North Sydney, or Macquarie Park typically start from $3,500 and scale with camera count, integration requirements, and access constraints.

Wireless camera systems: Lower installation labour costs, but hardware pricing varies widely and ongoing cloud storage subscriptions add to the long-term cost. A licensed installer can help you compare that against a wired system for your property.

Extra costs to factor in: Conduit runs on external masonry or sandstone, data point installation, monitor mounting, and system commissioning. Sydney's older inner-suburb homes, particularly Federation and inter-war builds, often have harder wall materials and tighter ceiling access, which adds time to the job.

The installation cost guide has a full breakdown of what drives pricing across different property types and system sizes.

What to check before hiring a security installer in Sydney

Licence status: Security installers in NSW must hold a current licence issued by SLED. Ask to see the licence number before agreeing to anything, and verify it through the NSW licence verification tool. If an installer can't or won't provide a number, that's a clear signal.

What the licence covers: NSW security licences are classed by activity. Installation and monitoring are separate licence classes. If you want your system professionally monitored, confirm the installer or their nominated monitoring provider holds the appropriate licence class for that work.

Site assessment before quoting: A good installer will want to see the property before giving you a number. They need to check entry points, lighting conditions at night, roof and ceiling access, and cable routes. In Sydney's older inner suburbs especially, a site visit will surface access constraints that a phone quote can't anticipate.

Insurance: A licensed installer should carry public liability insurance. Ask for a certificate of currency before work begins.

Written quote: Get the scope in writing before work starts. It should specify the cameras, the recorder or storage solution, the number of installation points, and the total price including labour and cabling materials.

Warranty terms: Ask who backs the warranty on the equipment and on the workmanship. Some installers supply their own branded hardware; others use third-party brands. Clarify upfront who you contact if something fails in the first year.

About Sydney's property types and installation

Sydney's housing stock creates a wide range of installation conditions. Federation and inter-war bungalows across the inner west and inner south — Newtown, Glebe, Leichhardt, Marrickville, Surry Hills — often have limited roof cavity access, timber framing, and in some cases sandstone or double-brick external walls that make drilling and cable runs more labour-intensive. These jobs take longer and cost more than the same camera count on a newer home.

Post-war brick veneer homes across the middle ring and western suburbs are more straightforward. Newer estates in areas like Box Hill, Oran Park, and Leppington are the most accessible for cabling, though large blocks and two-storey layouts can add run length and floor-to-floor cable drops.

Sydney has a high proportion of apartment and strata living. Installing cameras within a strata scheme usually requires owners corporation approval, particularly for anything in common areas or on the building exterior. An installer experienced with strata jobs will know the approval process. If you're in an apartment complex and want coverage of a shared area, raise it with the strata committee before booking a quote.

Residential and commercial installations in Sydney

Sydney installers tend to work across the full range of job types. On the residential side that covers CCTV, alarms, intercoms, and access control for houses, townhouses, and apartments in suburbs from Newtown and Surry Hills through to Chatswood, Bondi, and beyond.

Sydney's apartment density means strata considerations come up more often here than in other cities. Installing cameras in common areas of a strata scheme, such as lobbies, car parks, and building entries, requires owners corporation approval in NSW before work begins. For anything beyond your own lot, get strata sign-off first.

Commercial work in Sydney often involves CBD offices, retail on strips like King Street, Oxford Street, and Crown Street, hospitality venues, and warehouses in industrial precincts around Moorebank, Wetherill Park, and Eastern Creek.

Construction site security cameras in Sydney

Sydney's construction activity, spanning the Western Sydney Aerotropolis, the metro rail expansion, and ongoing residential development in the outer west and south-west, creates a steady demand for construction site security.

Construction site systems are a different setup to a permanent install. They are typically mounted on mast poles or fencing, run on solar or battery power where mains is not yet connected, and use 4G for remote monitoring. Most are hired on a monthly basis rather than purchased, since the cameras need to relocate as the build moves forward.

The construction site cameras guide covers system types and hire options in more detail.

ProtectFind is an online directory that lists security camera installers. It is not a party to any agreement between you and an installer found through this site. ProtectFind does not guarantee the quality, pricing, licensing status, or outcomes of any work carried out by listed installers. To the extent permitted by law, ProtectFind accepts no liability for any loss or damage arising from your use of the directory or your dealings with any installer.

Related Guides

• Security Camera Installation Cost Guide - what drives pricing across different property types, system sizes, and camera counts
• Construction Site Cameras - temporary and hire options for active sites, including solar and 4G-connected systems
• Electricians vs Security Installers - who is legally allowed to install security systems in NSW, and where the line sits
• Security Camera Brands Compared - a side-by-side look at the major brands available through licensed installers in Australia